Industrial Rope turnbuckles are constructed with a long sleeve with internal screw threads that accept a variety of fittings used to pull anchor points closer together or push them apart by turning the turnbuckle body. Industrial Rope turnbuckles are manufactured with a galvanized finish. We carry a full line of turnbuckle hardware including jaw jaw, eye eye, hook hook, eye jaw, and hook eye in various sizes from small turn buckles to large turnbuckles. Turnbuckles are necessary equipment in marine rigging and architecture industries.

The Forged Turnbuckle Body is open and available in sizes ranging from 1/4" to 1-1/4" to fit every project. These bodies are made from grade 316 stainless steel for maximum corrosion resistance and durability, making them ideal for marine and industrial turnbuckle applications.

Features:

1. ▶ Turnbuckles have a strong construction and a galvanized finish that resists rust and corrosion.

   ▶ Suitable for outdoor applications

   ▶ Open body style

   ▶ The approximate length of the turnbuckle when closed is 11-7/8"

   ▶ The safe working load limit is 1200 pounds

   ▶ Turnbuckles are rated with full thread engagement. Use caution to insure proper installation.

   ▶ "Rated Capacity" refers to a straight zero degree pull. Pulling at an angle can reduce the rated capacity significantly.

   ▶ Safety Factor equals 2.5 Rated Capacity.

   ▶ Meets specification FF-T-791b, Type 1, Form 1

   ▶ Use of substandard components will reduce rated capacity.