Electric Winch
      Web Sling Connector
# PRODUCTS / Rigging Products / Hooks. G80 / Web Sling Connector

Web Sling Connector

Product Details:

These are UQAB's "original" connecting links, made from Grade 63 steel, which used to be the standard callout for overhead lifting. That is no longer the case, as Grade 63 has been replaced with Grade 100 and Grade 80 chain and fittings. If you wish to use the connecting links on overhead lifting chains, be sure to downrate the sling's capacity accordingly (see the PDF at right for more information). Even better, upgrade to the UQAB Connecting Links, which are fully rated for use with Grade 100 or Grade 80 chain systems. Aside from overhead lifting, A-336 links are commonly used with lower grades of chain, including Grade 70, for basic repairs and splices. They are also used to make netting assemblies and feature wider interior throat opening dimensions than standard coupling links. Made from forged steel, Quenched and Tempered. Individually proof-tested at 2-1/2 times Working Load Limit with certification. Safety factor of 4:1.


    ▶ Used to connect grade 80 chain to an oblong link, hook or other component.

    ▶ Traditional design in a yellow painted finish for easy identification.

    ▶ Each connecting link or body half shall not have in use, more than one load-bearing component or chain.

    ▶ Always allow for sufficient articulation and avoid over-crowding to ensure the load will be transmitted axially.

    ▶ For reassembly of connectors, a new pin and stud assembly is recommended.

Click Here to Buy

Web Sling Connector Specification:

Item CodeSize(mm)Dimension (in)Wll(T))Weight (LBS)